Our Products

Description – TrueEASE humidifiers run water and air through the system when humidity is needed; using less water and saving energy by eliminating the constant cycling of air, saving customers water, energy and money. Plus, since humidified air feels warmer, customers can turn their thermostats down to help reduce heating bills. Thanks to TrueEASE’s patented design with multiple snap-into-place configuration options, obstructions such as pipes or compact spaces with tightly fit water heaters will no longer complicate installations.

Features:

• Interchangeable Bypass – Simply remove the bypass, flip it and snap it back in place!
• One-Piece Design – Mounting screws are located around the perimeter of the humidifier, making it easy to install in a single step rather than mounting a separate frame assembly.
• Integrated Wiring – Push terminals make TrueEASE simple to wire and the integrated control board eliminates cost and time spent on separate relays typically required to deliver additional humidity by forcing the fan. Simply flip a DIP switch to set advanced humidification options.
• Quick-Connect Plumbing – All plumbing is connected in a single step by attaching the hose to the quick-connect gasket
• Familiar Footprint – Installs in the same space as existing bypass humidifiers for easy retrofit upgrades. A foam seal ensures a tight fit
  2760 North Reading Rd, Reinholds PA – Mailing and Shop Address
  Phone: 717-336-2255 or 610-777-6892
  Fax: 717-733-5625
  Email: [email protected]
  2
• User Friendly Pad Access – Pad replacement is accessible from the front and either side of TrueEASE Bypass models, and the easy slide-out design means there’s no disassembly of the humidifier or interaction the plumbing needed to change the pad
• Total Installed: $ 950.00

Description – TrueEASE humidifiers run water and air through the system when humidity is needed; using less water and saving energy by eliminating the constant cycling of air, saving customers water, energy and money. Plus, since humidified air feels warmer, customers can turn their thermostats down to help reduce heating bills. Thanks to TrueEASE’s patented design with multiple snap-into place configuration options, obstructions such as pipes or compact spaces with tightly fit water heaters will no longer complicate installations.

Features:

• Interchangeable Bypass – Simply remove the bypass, flip it and snap it back in place!
• One-Piece Design – Mounting screws are located around the perimeter of the humidifier, making it easy to install in a single step rather than mounting a separate frame assembly.
• Integrated Wiring – Push terminals make TrueEASE simple to wire and the integrated control board eliminates cost and time spent on separate relays typically required to deliver additional humidity by forcing the fan. Simply flip a DIP switch to set advanced humidification options.
• Quick-Connect Plumbing – All plumbing is connected in a single step by attaching the hose to the quickconnect gasket
• Familiar Footprint – Installs in the same space as existing bypass humidifiers for easy retrofit upgrades. A foam seal ensures a tight fit
• User Friendly Pad Access – Pad replacement is accessible from the front and either side of TrueEASE Bypass models, and the easy slide-out design means there’s no disassembly of the humidifier or interaction the the plumbing needed to change the pad
• Total Installed: $ 1,150.00

Description – TrueEASE humidifiers run water and air through the system when humidity is needed; using less water and saving energy by eliminating the constant cycling of air, saving customers water, energy and money. Plus, since humidified air feels warmer, customers can turn their thermostats down to help reduce heating bills.

Thanks to TrueEASE’s patented design with multiple snap-intoplace configuration options, obstructions such as pipes or compact spaces with tightly fit water heaters will no longer complicate installations.

Features:

• Up to 50% Water Savings on Advanced Fan-Powered Models – Timer metered solenoid wets the pad only as needed, reducing water waste by as much as 30% and savings up to 10,000 gallons of water per year
• Quietest Residential Fan Humidifier – The centrifugal wheel and propeller fan design makes TruEASE quieter than standard variable HVAC systems and more than 20 dB quieter than equivalent competitive residential fan humidifiers
• One-Piece Design – Mounting screws are located around the perimeter of the humidifier, making it easy to install in a single step rather than mounting a separate frame assembly.
• Integrated Wiring – Push terminals make TrueEASE simple to wire and the integrated control board eliminates cost and time spent on separate relays typically required to deliver additional humidity by forcing the fan. Simply flip a DIP switch to set advanced humidification options.
• Quick-Connect Plumbing – All plumbing is connected in a single step by attaching the hose to the quickconnect gasket
• Familiar Footprint – Installs in the same space as existing bypass humidifiers for easy retrofit upgrades. A foam seal ensures a tight fit
• User Friendly Pad Access – Easy slide-out design means there’s no disassembly of the humidifier or interaction the the plumbing needed to change the pad
• Total Installed: $ 1,600.00

Description – Field Controls 46510800 UV-16/120 16″ UV-Aire In-Duct Air Purifier (120V) A Field Controls in-duct UV air purifier designed to install in the main supply or return duct of a forced-air heating/air conditioning system to reduce airborne microorganisms as air passes through the UV treatment zone.

Key Features

• Designed to emit UVC band light to reduce airborne viruses and microorganisms as air moves through the HVAC system
• Installs in the main supply or return duct and is intended to operate continuously (24/7)
• 16″ high-efficiency UVC lamp; designed for easy lamp replacement
• Plugs into a standard 120V outlet
• Manufacturer notes UV placement can also help keep A-coils cleaner, supporting system efficiency and reduced maintenance
• Manufacturer-listed specifications include: minimum duct width 16″ and system sizing 1.5 to 5.0 tons (UV-16/120)
• Included kit components (per installation manual): ballast assembly & power cord, mounting base, UV lamp, sheet metal mounting screws, instruction sheet, fiberglass duct board mounting bracket, and UVC light shield
• Replacement/service items shown for this model include a 16″ replacement lamp and a ballast assembly for UV-16 (120V) Compatibility & Applications
• Intended for closed duct systems in forced-air HVAC where the duct can accommodate the 16″ UV-16/120 and meets the minimum duct width requirement.
• Must only be used where the manufacturer specifies this exact model/part number: UV-16/120
  (46510800).
• Total Installed: $ 889.00